background image

5

Operating instructions ecoTEC plus 937

a

 Caution!

The appliance may only be operated with its 
casing properly and permanently closed. 
Otherwise, in unfavourable conditions, material 
damage or even injury or death can result.

Filling pressure of the heating system

Regularly check the filling pressure of the heating 
system (see Section 4.2.2).

Leaks

If there is a leak in the water pipes between the 
appliance and the taps, immediately turn off the cold 
water shut-off valve and have your engineer repair the 
leak.

Frost protection

Your boiler is fitted with a frost protection function:
If the temperature of the heating water falls below 5 °C 
with the main switch in the on position, the boiler will 
switch on and the heating circuit is heated up to approx. 
30 °C.

h

 Note!

It cannot be guaranteed that water is 
circulating through the entire heating system.

If the boiler is not operated for several hours during 
very cold weather there is a danger that the system will 
freeze up.
Make sure that the central heating system remains 
switched on during extended periods of frost and that 
the temperature in all the rooms remains above 
freezing.

It must, however, be pointed out that the boiler will be 
switched off automatically by the built-in checking 
devices if certain errors arise (e.g. interruption in the 
power or gas supply and faults in the flue gas removal 
system). In order to prevent the danger of freezing up 
you can drain both the boiler and the heating system.

h

 Note

The frost protection and monitoring devices are 
only active if the main switch of the unit is in 
position "I“ and the boiler is connected to the 
power supply. Please observe the instructions 
concerning frost protection in Section 4.9 in all 
cases

Instructions on operation

3.1 Factory 

guarantee

3.1.1 

Two years guarantee for ecoTEC plus units

Vaillant is committed to rectify any manufacturing faults 
which arise during the first 24 months after installation.
A prerequisite for the effectiveness of the guarantee in 
the second year is that, one year after installation, an 
annual inspection is carried out by a CORGI registered 
maintenance engineer.
The costs for this annual service are not included in the 
guarantee.

3.1.2 Registering 

with 

us

Registration is simple. Simply fill in the card for 
guarantee registration and send it back to Vaillant within 
30 days after installation. Your details will be 
automatically entered into the Vaillant guarantee plan.

h

 Note!

A receipt is not issued.

3.1.3 Immediate 

help

If a fault arises on your Vaillant boiler please contact 
your installer initially since the guarantee conditions 
stipulate that his expertise must be made use of.
If you cannot contact your installer then contact Vaillant 
Service Solutions on the phone number 0870 6060 777.

3.2 Intended 

use

The Valliant ecoTEC plus 937 is a state-of-the-art 
appliance which has been constructed in accordance 
with recognised safety regulations. Nevertheless, there 
is a risk of injury or death to the user or others and 
damage to the appliance or other property in the event 
of misuse or use for which the appliance is not intended.

The units are intended as heat generators for sealed 
hot-water central heating installations and for central 
hot water preparation. Any other use or extended use is 
considered to be improper. The manufacturer or supplier 
is not liable for any resulting damage. The user alone 
bears the risk.

Intended use includes the observance of the operating 
and installation manual and all other applicable 
documents, as well as adherence to the maintenance 
and inspection conditions.

a

 Caution!

Any improper use is forbidden.

Safety 2

Instructions on operation 3

Summary of Contents for ecoTEC plus 937

















Reviews: