background image

Safety 1

0020239016_01 ecoTEC plus Operating instructions

3

1 Safety

1.1 Action-related warnings
Classification of action-re-
lated warnings

The action-related warnings
are classified in accordance
with the severity of the pos-
sible danger using the following
warning signs and signal words:

Warning symbols and signal
words

Danger!

Imminent danger to life
or risk of severe personal
injury

Danger!

Risk of death from electric
shock

Warning.

Risk of minor personal
injury

Caution.

Risk of material or envir-
onmental damage

1.2 Intended use

There is a risk of injury or death
to the user or others, or of dam-
age to the product and other
property in the event of im-
proper use or use for which it
is not intended.
The product is intended as a
heat generator for closed cent-

ral heating installations and for
hot water generation.
Intended use includes the fol-
lowing:

observance of the operating
instructions included for the
product and any other system
components

compliance with all inspection
and maintenance conditions
listed in the instructions.

This product can be used by
children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge if
they have been given supervi-
sion or instruction concerning
use of the product in a safe way
and understand the hazards in-
volved. Children must not play
with the product. Cleaning and
user maintenance work must
not be carried out by children
unless they are supervised.
Any other use that is not spe-
cified in these instructions, or
use beyond that specified in this
document shall be considered
improper use. Any direct com-
mercial or industrial use is also
deemed to be improper.

Caution.

Improper use of any kind is
prohibited.

Summary of Contents for ecoTEC VU 246/6-5 OVZ





















Reviews: