Operation
26
Operating instructions geoTHERM 0020051578_03
4
4.9
Setting the heating mode
4.9.1
Setting the operation mode for heating
mode
HK2
2
Parameter Heating
Operation mode
>Auto
Set value day
20 °C
Night set back temp.
15 °C
>Select operation mode
Operation mode
The following operation modes are available for each heat-
ing circuit (HK2, HK4 to HK15 optional):
Auto:
The operation of the heating circuit alternates
between the "Heating" and "Energy sav" operation
modes in accordance with an adjustable time pro-
gramme.
Eco:
The operation of the heating circuit alternates
between the "Heating" and "Off" operation modes in
accordance with an adjustable time programme. The
heating circuit is switched off during the set-back
period, provided the frost protection function
(depending on the outside temperature) is not ena-
bled.
Heating:
The heating circuit is operated at the target room
temperature independently of any presettable time
programme.
Energy sav:
The heating circuit is operated at the night set
back temp. independently of any presettable time pro-
gramme.
Off:
The heating circuit is off when the frost protection
function (dependent on the outside temperature) is
not enabled.
i
Additional heating circuits are displayed based
on the system configuration.
Summary of Contents for geoTHERM SERIES
Page 1: ...Operating instructions ES GB geoTHERM...
Page 2: ......
Page 57: ...Operating instructions geoTHERM Heat pump GB For the operator Operating instructions...
Page 111: ......
