Operation
34
Operating instructions geoTHERM 0020051578_03
4
4.12
Programming the holiday function
for the complete system
Holiday programming
6
for cpl. system
Periods
1 >03.01.10
05.01.10
2
09.01.10
24.01.10
Room temp. setpoint
15 °C
>Set starting day
Prolonged periods of absence can be set in the
Holiday
programming
menu. It is possible to program two holiday
periods by specifying the dates for the controller and all
system components connected to it. In addition, you can
also set the desired
room temp. setpoint
for the holidays
here, i. e. independently of the normal time programme.
After the holiday time has elapsed, the controller automati-
cally reverts to the previous operation mode. The holiday
programme can only be activated in "Auto" and "Eco"
mode.
i
The room temp. setpoint during this period
should be selected to be as low as possible. Dur-
ing the holiday time programme, DHW loading
and the circulation pump switch automatically to
the "Off" operation mode.
Factory setting: Period 1:
01.01.2010 – 01.01.2010
Period 2:
01.01.2010 – 01.01.2010
Room temp. setpoint 15 °C
Summary of Contents for geoTHERM SERIES
Page 1: ...Operating instructions ES GB geoTHERM...
Page 2: ......
Page 57: ...Operating instructions geoTHERM Heat pump GB For the operator Operating instructions...
Page 111: ......
