Safety 1
0020255037_00
multiMATIC
Operating instructions
3
1
Safety
1.1
Action-related warnings
Classification of action-related warnings
The action-related warnings are classified in
accordance with the severity of the possible
danger using the following warning signs and
signal words:
Warning symbols and signal words
Danger!
Imminent danger to life or risk of
severe personal injury
Danger!
Risk of death from electric shock
Warning.
Risk of minor personal injury
Caution.
Risk of material or environmental
damage
1.2
Intended use
In the event of inappropriate or improper use,
damage to the product and other property
may arise.
The product is intended for using an eBUS
interface to control a heating installation with
heat generators from the same manufacturer.
Intended use includes the following:
–
observance of the operating instructions
included for the product and any other
system components
–
compliance with all inspection and main-
tenance conditions listed in the instruc-
tions.
This product can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabil-
ities or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the product in a safe
way and understand the hazards involved.
Children must not play with the product.
Cleaning and user maintenance work must
not be carried out by children unless they are
supervised.
Any other use that is not specified in these
instructions, or use beyond that specified in
this document shall be considered improper
use. Any direct commercial or industrial use
is also deemed to be improper.
Caution.
Improper use of any kind is prohibited.
1.3
General safety information
1.3.1 Danger caused by improper
operation
Improper operation may present a danger to
you and others, and cause material damage.
▶
Carefully read the enclosed instructions
and all other applicable documents, par-
ticularly the "Safety" section and the warn-
ings.
▶
Only carry out the activities for which in-
structions are provided in these operating
instructions.
1.3.2 Moisture and mould damage due to
inadequate exchange of air
In heavily insulated rooms that only allow a
small exchange of air, moisture and mould
damage may occur.
▶
Ventilate the rooms regularly by open-
ing windows and activate the
Ventilation
boost
function once to save energy.
Conditions
: Ventilation unit is connected
▶
Do not disconnect the ventilation unit from
the power grid.
▶
Clean and service the ventilation unit in
accordance with the instructions for the
ventilation unit.
1.4
Recycling and disposal
▶
The competent person who installed your
product is responsible for the disposal of
the packaging.
If the product is labelled with this mark:
▶
In this case, do not dispose of the product
with the household waste.
▶
Instead, hand in the product to a collection
centre for waste electronic or electrical
equipment.
If the product contains batteries that are
labelled with this mark, these batteries may
