Notes on the documentation 2
0020237954_01 Installation instructions
27
2 Notes on the
documentation
2.1 Observing other applicable
documents
▶
You must observe all the operating and
installation instructions included with the
system components.
▶
Observe the country-specific notes in
the Country Specifics appendix.
2.2 Storing documents
▶
Pass these instructions and all other
applicable documents on to the system
operator.
2.3 Validity of the instructions
These instructions apply only to:
–
VAE 190/1 RHT: 0010020783
3 Product description
The product is an extract air fan for kit-
chens, bathrooms and WCs.
Two operating modes are possible:
–
Automatic mode
–
Manual mode
In automatic mode, the product is auto-
matically switched on and off by an air hu-
midity sensor. The limit value for the air
humidity is preset at the factory to 65% rel-
ative air humidity.
–
Adjustable air humidity: 40-90%
In manual mode, the product is switched
on and off by an on/off switch, e.g. by a
light switch. After switching off the product,
it first continues to run for a set overrun
time before the product switches off.
–
Adjustable overrun time: 2
–
25 minutes
The product can be installed for single-
stage or two-stage operation.
The product is suitable for concealed in-
stallation in the wall or installation in the
ceiling.
3.1 Information on the
identification plate
Information on the
identification plate
Meaning
Read the installation
and maintenance
instructions.
Protection class II
VAE 190/1 RHT
Type designation
VAE
Extract air fan
190
Max. air flow
/1
Unit generation
R
Radial fan impeller
H
Air humidity sensor
T
Timer for the overrun
time
p
MAX
Max. pressure in-
crease
P
max
Measuring record
V
MAX
Max. air volume flow
Serial number
The 7th to 16th digits
of the serial number
form the article num-
ber
3.2 CE label
The CE label shows that the products
comply with the basic requirements of the
applicable directives as stated on the iden-
tification plate.
The declaration of conformity can be
viewed at the manufacturer's site.
