Operating instructions
Installation and maintenance instructions
7
Recycling and disposal
Disposing of the packaging
>
As the competent person, dispose of the packaging cor-
rectly.
>
Observe all relevant regulations.
If the product is labelled with this mark:
>
In this case, do not dispose of the product with the
household waste.
>
Instead, hand in the product to a collection centre for
waste electrical or electronic equipment.
8
Customer service
The contact details for our customer service are provided in
the Country Specifics appendix or on our website.
4
0020291395_00
For the competent person
1
Product description
See operating instructions and/or title page
2
Set-up
2.1
Transporting the photovoltaic module
>
Where possible, carefully transport the photovoltaic mod-
ule in its packaging.
>
Avoid bumping, knocking or pushing the surface, the
edges, and the corners of the glass panels.
>
Transport the photovoltaic module upright.
>
Carry the photovoltaic module with the help of a second
person. Hold the modules by the long sides when doing
so.
>
Wear clean and soft gloves.
>
Do not exert tension or pressure on the connection
boxes or the cabling.
2.2
Storing the photovoltaic module
>
Always store the photovoltaic module in a dry, padded
location.
>
Always store the photovoltaic modules upright.
>
Secure each photovoltaic module against toppling over.
>
Do not stack the photovoltaic modules.
2.3
Unpacking the photovoltaic module
>
Carefully remove the packaging and padding. Do not use
any pointed or sharp objects.
2.4
Checking the scope of delivery
Number
Designation
1
Photovoltaic module
1
Enclosed documentation
2.5
Checking the mounting frame
>
Ensure that the mounting frame has been aligned and
installed in accordance with the planning requirements
and set-up instructions (images
7
,
8
and
9
).
2.6
Correctly guiding the mounting rails
See appendix A, „Installation drawing“
2.7
Requirements for the installation site
–
No heavy soiling expected
–
No shading
–
Maximum permissible suction and pressure loads, see
appendix A, „Installation drawing“
2.8
Preparing the installation
>
Before you start installing the modules, prepare the elec-
trical installation (
¬
page
5
).
2.9
Checking the photovoltaic module
>
Before installing each photovoltaic module, check its
mechanical integrity.
>
Do not set up and install damaged components.
Summary of Contents for VPV P 300/3 M SWF
Page 22: ...a a 22 0020291395_00 1 1 1 3 4 1 2 IP 1 3 1 4 1 5...
Page 28: ...28 0020291395_00 9...
Page 30: ......
Page 31: ......
