Operation
14
Operating instructions VRC 470 0020116689_00
4
4.3
Overview of setting and read-out options
The tables below provide overviews of the controller's
modes and the setting and read-out options.
– If the "Increment/Select" column is blank, these are
values that you can read but not adjust.
– If a value cannot be set at the factory, for example
because it is currently being measured, the "Factory
setting" column will be blank.
– If nothing is entered in a "Selection level 3" column,
you will access the setting level directly from selec-
tion level 2.
>
In the last column, "Own setting", enter that value
that you or the heating engineer have set.
4.3.1
Overview of modes
The right function key can be used to navigate from the
basic display directly to the settings under "Mode".
The currently activated mode is stated in the top left of
the basic display.
If you have activated an advanced function, the display
indicates the advanced function.
Mode
Setting
Factory setting
Own setting
Current mode
Auto
or
Summer
or
Day
or
Set-back
or
System off
Automatic mode
Summer mode
Comfort mode
Set-back mode
System off
Auto (automatic mode
active)
Special operating mode
Cylinder boost
Active, Not active
Not active
Party function
Active, Not active
Not active
1 day away from home
Active, Not active
Not active
1 day at home
Active, Not active
Not active
Ventilation boost
Active, Not active
Not active
Tab. 4.1 Overview of modes
