9 Operating and display functions
20
Installation instructions VRT 350 0020131957_01
9
Operating and display functions
The path details given at the start of each function descrip-
tion indicate how you reach this function in the menu struc-
ture.
The square brackets contain the level of detail to which the
function belongs.
You can use the left-hand selection button
Menu
and the list
entry
Installer level
to set the operating and display func-
tions.
The table "Overview of operating levels" shows you which
functions are available for Zone 2 via the auxiliary controller.
9.1
Service information
9.1.1
Entering contact details
Menu
→
Installer level
→
Service information
→
Enter con-
tact data
–
You can enter your contact details (company name and
phone number) in the controller.
–
As soon as the date of the next service appointment is
reached, the operator can view these contact details in
the display of the controller.
9.1.2
Entering the service date
Menu
→
Installer level
→
Service information
→
Service
date
–
In the controller, you can save a date (day, month, year)
for the next regular service.
When the date for the next service date is reached, the mes-
sage
Service heater 1
is displayed in the basic display of the
controller.
If a service date is saved in the heater, the message
Service
heater 1
appears on the heater when this date is reached.
The message is switched off if:
–
the date is in the future.
–
the initial date 01.01.2011 is set.
Note
To find out which service date to enter, refer to the
instructions for your heater unit.
9.2
System configuration, system
9.2.1
Reading the system status
Menu
→
Installer level
→
System configuration
[
System
---
-]
→
Status
–
This function allows you to read the status of the heating
system. If there is no fault, the message "
OK
" appears
here. If there is a fault, the status "
Fault
" is displayed. If
you press the right selector button the list of error mes-
sages (
→
Page 24) is displayed.
