Chapter 3 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 27
Panel Mounting Frame
To enable a neat and dirt free embedded installation of the transmitter,
a panel mounting frame is available as an option (Vaisala order code:
216038). The frame is a thin, flexible plastic frame for the transmitter,
with adhesive tape on one side.The frame is used to hide any rough
edges of the installation hole, and provide a more finished look. Note
that the panel mounting frame is not intended to bear the weight of the
transmitter, and does not include any mounting supports.
Use the panel mounting frame as follows:
1.
Use the frame as a template to mark the required size for the
installation hole in the panel.
2.
Cut the hole in the panel.
3.
Mount the transmitter through the panel with suitable supports.
4.
Remove the paper protecting the adhesive tape on the frame, and
attach the frame around the transmitter. Refer to
0704-002
Figure 13
Panel Mounting Frame
Numbers refer to
1 = Panel (not included)
2 = Panel mounting frame
