CA10 Quick Guide
This document is a quick guide for installation of CA10 Cloud Access Point.
Detailed instructions for its use are available in the
online help.
More information and downloadable documents are available from the product
page:
CA10 product overview
Cloud Access Point CA10 is a wireless networking hardware device intended for connecting
CWL100 data loggers to Vaisala Jade Smart Cloud service. Do not modify the device or use it
in ways not described in the product documentation.
CA10 access points and CWL100 data loggers are associated with a specific cloud account
when they are purchased, so there is no need for the user to do any device pairing.
CA10 requires an Internet connection for operation. If there is no
network available at the installation location, you can provide the connection
using a suitable mobile router. Note these specific network requirements:
• The connected network must provide the IP address automatically using
DHCP.
• CA10 must be able to connect to TCP port 443 (for Jade Smart Cloud service)
and UDP port 123 (for Network Time Protocol service) through the network
firewall.
CAUTION!
Table 1 Installation safety specifications
Property
Specification
Operating environment
Indoor use
Use in wet locations
No
Operating temperature
−20 … +60 °C (−4 … +140 °F)
Storage temperature
−20 … +60 °C (−4 … +140 °F)
Operating humidity
0 … 90 %RH, non-condensing
Operating altitude
Max. 2000 m (6500 ft)
Pollution degree
2
IP rating
IP30
Operating voltage using dedicated power
supply connector
10 … 30 VDC
PoE power class
Class 0
Power consumption
Max. 13 W
Frequency band
See type label on device
5
ENGLISH
Summary of Contents for CA10
