Number and type of flanges per
cabinet model
Type of connection
Recommended flange to
use
CAB100B:
• 2 flanges on the top and
2 on the bottom of the
enclosure
• Top flanges are made of
rubber. Rubber or stainless
steel flanges are available to
order for the bottom.
Tubes for PDT101 transmitters
Wires for external measurement devices
Top flange
AC (mains) cable
Bottom right-hand flange
Wires for safety barriers and galvanic
isolators
Bottom left-hand flange
only
3.3.1 Leading cables through rubber flange
To preserve the IP rating of the enclosure, make sure that you lead cables
through the flanges as instructed.
CAUTION!
• Pipette
• Cable cutters
• Cable-stripping pliers
1. Lead the cables into the enclosure using the pipette provided.
2
1
1
Cable
2
Pipette for leading the cable through the flange
2. Insert the pipette through one of the feed-through rondels in the flange.
3. Insert a cable and pull it through to the inside.
4. Inside the enclosure, connect the cables and wires according to the wiring diagram.
CAB100 Installation Guide
M212242EN-B
24
Summary of Contents for CAB100
Page 1: ...M212242EN B Installation Guide CMS Industrial Cabinet CAB100...
Page 144: ......
Page 146: ...www vaisala com...