Removing and recycling device
The device must be removed after it is no longer operational, the battery stops working, or
when a replacement device is installed. Recycle the device according to local hazardous waste
regulations.
Needed equipment
• GroundCast removal tool
• Power drill and 6-mm drill bit
• Screwdriver
• 13-mm wrench
1. Removing device
1.
Drill a hole to the top of
the device with a 6-mm
drill bit.
The correct drilling depth is
20 ... 30 mm (0.8 ... 1.1 in).
Do not exceed the drilling
depth of 40 mm (1.5 in).
2.
Detach the eye screw
from the removal tool.
3.
Attach the eye screw to
the hole in the device.
9
