Connecting to your Network
M211488EN-E
27
The status bar is located at the bottom of the HMT140
Utility window. It contains the following panels:
•
Left panel:
Displays the Configuration Cable status:
Found USB Programmer or Looking for USB
Programmer.
•
Middle panel:
Displays progress messages of the
different actions: Update, Retrieve, Status, and Info.
•
Right panel:
Displays a message when the
parameters on the Setup page have been modified and
require saving.
8
If the IP address is static, uncheck the
IP Address
Dynamically Assigned
option and enter the network
parameters. Otherwise leave this checkbox checked.
Note:
For additional IP address settings information
see, Check Transmission status on page 31.
9
Enter the parameters for the
WLAN
(wireless LAN
router settings).
10
Enter the
Destination
IP address/name and port
number of the host (these are the Vaisala viewLinc server
settings) to which the HMT140 will send information.
Note:
If you do not know what information to enter for
steps 6-9, please request these parameters from
your network administrator.
11
Click the
Sensor
tab and select a
Transmit Period
Time
and number of
Tries
, or accept the default
settings.
12
Click
Update
.
13
Click the
Status
tab to check that the settings appear as
configured. Click
Get
if the settings do not appear
automatically.
14
Disconnect the HMT140 Configuration Cable from the
HMT140 and wait for eight seconds.
15
Press the SERVICE button inside the HMT140.
Optional:
Enter a name for the saved settings on the
Setup
tab in the
Saved Settings
field, then click the
disk icon to save. To configure custom settings for the
HMT140, refer to page 28. To configure additional
HMT140 data loggers, refer to the Vaisala viewLinc
User’s Guide.
Summary of Contents for HUMICAP HMT140
