Chapter 3 _______________________________________________________________ Installation
VAISALA____________________________________________________________________ 17
CHAPTER 3
INSTALLATION
This chapter provides you with information that is intended to help
you install the HMT310.
Selecting Location
Finding a suitable site for the Humidity and Temperature Transmitter
HMT310 is important for getting representative ambient
measurements. The site should represent the general area of interest.
Mounting
Mounting the Transmitter/
Removing the Transmitter Unit
Select a place with stable conditions for mounting the transmitter. Do
not expose the transmitter to direct sunlight or rain.
NOTE
If the transmitter is mounted outdoors cover it with a shelter
(purchased by customer). Always mount the transmitter housing with
the cable bushings pointing downwards.
1.
Mount the plate onto the wall with four/two screws
(Ø 4.5 mm/6.0 mm).
2.
Place the transmitter onto the mounting plate and fasten it with
two Allen screws.