Chapter 4 _________________________________________ MENU OPERATIONS AND SETTINGS
1. Open
the
MENU
. First press the right arrow key, and then press
the
OPEN
key.
2. Select
Display
. Press the right arrow key.
3. Select
Rounding
. Press the right arrow key.
4.
To set rounding on (one decimal display), press the
ON
key. To
set rounding off (two decimal display), press the
OFF
key.
5.
To return to the basic display, press the
EXIT
key.
Hold/Save Display
Hold/Save
function enables you to freeze a certain display reading.
This reading can be saved into the memory.
1. Open
the
MENU
. First press the right arrow key, and then press
the
OPEN
key.
2. Select
Display
. Press the right arrow key.
3. Select
Hold/Save
.
4.
To freeze the display, press the
HOLD
key. The frozen
measurement data is displayed.
5.
To save the reading, press the
SAVE
key and then return to the
basic display by pressing the
CANCEL
key.
6.
You can save several readings with
HOLD-SAVE
function. The
data points are indentified on the basis of the saving date and
time. All the individual readings (data points) are stored in a
same file marked with a Hand symbol. The file remains in the
indicator memory even if the indicator is switched OFF.
7.
To view the saved readings, press the function key, select
Record
, then select
View recorded data
, and press the right
arrow key.
8.
Select the file marked with the Hand symbol, press the right
arrow key. Now you can see the saved data readings. Press the
TIMES
key to see the recording timestamps.
9.
To return to the basic display, press the
EXIT
key.
Graphic History
Graphic history shows the data curve of the last hour. To see longer
graphs, use the data recording function to save the data and then view
it as a graph.
VAISALA _______________________________________________________________________ 25
