Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 53
Installing MAWS Basic Components
The installation of the basic components is done only when taking the
MAWS weather station in use for the first time. Some of the steps are
applicable also in the normal use of the portable MAWS201 station.
NOTE
The figures in the procedure are taken from installing the MAWS201.
In case you are installing MAWS101, you do not have any of the
tripod's parts attached as shown in some of the figures.
1.
Loosen and remove two hand screws (1) beneath the tube. Slide
the tube (2) down to expose the logger.
0201-017
Figure 34
Tube Securing Hand Screws
2.
Remove the logger cover screw (1) to open the logger housing.
0201-018
Figure 35
Logger Cover Screw
