Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 57
0201-024
Figure 42
Sensor Arm Support Attachment
9.
Attach the sensor arm(s). Fit the cables into the opening (1)
before tightening the attachment screws (2 & 3). For installing
the sensors, see section Installing Sensors on page 71.
0201-025
Figure 43
Sensor Arm Assembly
Installing MAWS101 to a Mast
MAWS101 can be installed in several ways:
- Using the 2 meter high mast DKP102.
- Using the 10 meter high mast DKP12.
- Using any wooden pole or wall.
On DKP102
The stud bolts and anchors for installing the mast are delivered with
the mast. Typically, the mast is installed on an existing concrete
foundation (with a minimum size of 500 × 500 × 300 (mm)) or on a
rocky bed. Drill holes into the foundation as described in Figure 44 on
page 58. After that, fasten the stud bolts to the anchors by hand.
