1.
Loosen the M5 screws (3 pcs) with a 4-mm Allen key and rotate the connector cover to remove it.
2.
To attach the connector, guide it to the connector slot.
3.
To tighten the connector, turn the locking ring.
Turning the connector body may break the connector.
CAUTION!
4.
Reattach the connector cover and tighten the M5 screws (3 pcs).
To verify that the cable is tight, wiggle the cable and make sure the locking ring is tight.
Technical note
M212210EN-C
2
RESTRICTED
