10
11
EN
EN
Using the appliance
Using the appliance
B
B
Display controls
The control panel for controlling the temperature inside the freezer compartment is located
inside the freezer.
Use your device according to the following control regulations, your device has the corresponding
functions and modes as displayed on the control panels in the images below. When the unit is
turned on for the first time, the backlighting of the display icons will start to work. When the doors
are closed, the backlight will turn off.
Temperature setting
IMPORTANT :
For optimal food preservation, we recommend that you set
the freezer temperature to -18°C. If you wish to change the
temperature, follow the instructions below:
PLEASE NOTE
:
Setting a high temperature will accelerate food waste.
CAUTION
:
When you set the temperature, you are setting an average
temperature for the entire cavity of the appliance. The
temperatures in the cavity may vary from the display
depending on the load of food in the freezer and its location.
A low or too high ambient temperature may also affect the
temperature in the unit.
L
Install the screw hole cover in the upper right corner of the refrigerator. Install the hinge cover
(from the plastic bag) in the left corner. Put the other hinge cover in the plastic bag.
M
Move the handle from the left side of the door to the right side.
CAUTION :
When changing the opening side of the door, the appliance
must not be connected to a socket. The plug must be
removed from the mains beforehand.
PLEASE NOTE :
1. Due to continuous changes in our products, your device
may differ slightly from these instructions, but its
functions and methods of use remain the same.
2. To get the best energy efficiency from this product, please
place all shelves, drawers in their original position as
shown in the illustration above.
3. If you remove a drawer, please rotate the shelf under the
drawer 180° up and down for best energy efficiency.
