46
47
FR
FR
Informations pratiques
Informations pratiques
C
C
46
47
EN
EN
Useful information
Useful information
C
C
Problems
Possible causes
Solutions
Rust spots on cutlery
The objects affected are not
resistant to rust.
• Avoid putting objects in
the dishwasher that are not
rust-resistant.
You did not immediately
start a program after adding
regenerating salt. Salt
entered the wash cycle.
• Always run an empty
wash program after adding
salt.
• Do not select the Turbo
function (if available on
your model) after adding
regenerating salt.
The cover of the water
softener is loose.
• Check that the water
softener cover is closed
correctly.
Knocking sounds from the
dishwasher
A spray arm is hitting an
object in one of the racks.
• Stop the program and
reposition the objects that
being hit by the spray arm.
Rattling sounds from the
dishwasher
Tableware moving in the
dishwasher.
• Stop the program and
rearrange the tableware.
Knocking sounds from
water pipes
This may be related to the
installation or the diameter
of the pipes.
• This does not affect the
dishwasher's operation.
• If in doubt, consult a
qualified plumber.
Problems
Possible causes
Solutions
The tableware is not clean.
The tableware has not been
correctly positioned.
• Refer to the chapter
"Preparing and loading
tableware".
The selected program was
too gentle.
• Select a more intensive
program.
Insufficient detergent was
released.
• Use more detergent, or
use a different type.
Objects are blocking the
movement of the spray
arms.
• Reposition objects so that
the spray arms can freely
rotate.
The filter system is not
clean or has not been
correctly inserted in the
bottom of the tub. This can
block the spray arms.
• Clean and/or insert the
filter correctly.
• Clean the spray arm jets.
The glasses are cloudy.
A combination of soft water
and too much detergent.
• Use less detergent if your
water is soft and select
a shorter cycle to wash
glasses.
White spots appear on
dishes and glasses.
In areas with hard water,
limescale marks may
appear.
• Add more detergent.
Black or grey marks on
dishes
Aluminium utensils have
rubbed against the dishes.
• Use a mildly abrasive
cleaner to remove these
marks.
Detergent left in the
dispenser
Tableware is blocking the
detergent dispenser.
• Load the tableware
correctly.
Summary of Contents for 972331
Page 2: ...1 2 3 4 5 A B 6 7 8 ...
