35
EN
Cleaning and maintenance
C
Troubleshooting
Caution!
Before troubleshooting, disconnect the power supply. Only a qualified
electrician of competent person must do the troubleshooting that is not in this
manual.
Important!
There are some sounds during normal use (compressor, refrigerant
circulation).
Problem
Possible cause
Solution
Appliance does not
work
• Temperature regulation
knob is set at number “0”.
• Mains plug is not plugged
in or is loose.
• Fuse has blown or is
defective.
• Socket is defective.
• Set the knob at other number to
switch on the appliance.
• Insert mains plug.
• Check fuse, replace if necessary.
• Mains malfunctions are to be
corrected by an electrician.
The food is too
warm
• Temperature is not
properly adjusted.
• Door was open for an
extended period.
• A large quantity of warm
food was placed in the
appliance within the last
24 hours.
• The appliance is near a
heat source.
• Please look in the initial
Temperature Setting section.
• Open the door only as long as
necessary.
• Turn the temperature regulation to
a colder setting temporarily.
• Please look in the installation
location section.
Appliance cools too
much
• Temperature is set too
cold.
• Turn the temperature regulation
knob to a warmer setting
temporarily.
Unusual noises
• Appliance is not level.
• The appliance is touching
the wall or other objects.
• A component, e.g. a
pipe, on the rear of the
appliance is touching
another part of the
appliance or the wall.
• Re-adjust the feet.
• Move the appliance slightly.
• If necessary, carefully bend the
component out of the way.
Summary of Contents for CS 315 C X742C
