Safe Digital Lock PS310/E31, PS610/E31
USER MANUAL
www.promet-safe.com
4.3
Changing the User Code [PIN2] without the
Master Code
[ON] [Enter] [3] [Enter] [1-9 (user
number)] [Enter] [PIN2] [Enter]
[new PIN2] [Enter]
[repeat new PIN2] [Enter]
Checking the new User Code:
[ON][new PIN2][Enter]
4.4
Deleting the User Code
[ON] [Enter] [0] [Enter] [1-9 (user
number)] [Enter] [PIN1] [Enter]
5
Time Delay Function
5.1
Switching-on the Time Delay function
[ON] [Enter] [6] [Enter] [PIN1] [Enter]
[01-99 – delay time] [1-9 – time for
opening] [Enter]
F.e.: 092
– 9 minutes is delay time, 2 minutes
is time for opening
5.2
Opening the Lock with the Time Delay
[ON] [PIN1 or PIN2] [Enter] (Waiting
Delay Time. Acoustic signal will inform
about the end.)[PIN1 or PIN2] [Enter]
5.3
Switching-off the Time Delay function
[ON] [Enter] [6] [Enter] [PIN1] [Enter]
[000] [Enter]
6
Dual Code Function
6.1
Switching-on the Dual Code function
Before switching-on the function, make sure
you
’re assigned a User Code [PIN2] see
par.4.2.
[ON] [Enter] [7] [Enter] [1-9 (user
number)] [Enter] [PIN1] [Enter]
6.2
Switching-off the Dual Code function
[ON] [Enter] [8] [Enter] [PIN1] [Enter]
6.3
Opening the Lock with the Dual Code
[ON] [PIN1] [Enter] [PIN2] [Enter]
If you have time delay, you should to wait
delay time before enter PIN2.
You have 60 seconds to enter PIN2
that’s
indicate [
G]
1
(
см. п.2.3) every 5 seconds.
7
Mute/unmute
[ON] [Enter] [5] [Enter] [PIN1] [Enter]
8
Servicing
8.1
Changing the Battery
The battery is located on the inner side of the
door. Depending on the safe model, battery
could be either inside the lock battery
compartment (image 8.1a) or in a special pull-
out battery box (image 8.1b).
The
exact
location
of
the
battery
compartment or the batter box could be
different depending on the safe model.
Take
out
the
cover
of
the
battery
compartment of the lock (see Image 8.1a. or
pull out the box (see Image 8.1b).
Image 8.1
a.
b.
Install a new battery (9V, type 6LF22).
Take the cover or the box back to their
location.
8.2
Opening the lock when the Battery is
Discharged
Take a new battery (9V, type 6LF22).
Take out the plastic cover for emergency
power (5), see Image 8.2.
Image 8.2
Press the new battery to emergency power
pins and fix it in this position (see Image 8.3).
Do not make the battery’s contacts to the
metal parts of the lock in order to prevent
possible discharging of the battery.
Image 8.3
Enter the valid code on the keypad (1).
Disconnect the emergency battery, open
the door and change the discharged
battery, see par. 8.1
Edition 1/0 as of 24.04.2018
