39
2.2 Setting the user code
You can only set a user code after changing the master code from the factory code to your personalized one.
Please note – the user code may not be the same as the master code!
Make sure that the safe door is open when you change the code (ON – master code – ENTER).
Up to 9 users can be programmed. They receive an user ID. For exemple, user 1 receives user ID “1”.
The new user code is now set. If the new code is not accepted, you hear a long signal and a red light flashes. In
that case, start again at step 1 for setting the user code. After setting the code, it is best to test the new code
several times with the door open.
Step
Action
Key
Signal
1.
Press ON
ON
2.
Press Enter
Enter
3.
Press 2
2
4.
Press Enter
Enter
5.
Key in a user ID (choose between 1-9), e.g. 1
1
6.
Press Enter
Enter
7.
Key in the master code, e.g. 567891
567891
8.
Press Enter
Enter
9.
Key in the new user code, e.g. 111111
111111
10.
Press Enter
Enter
11.
Repeat the new user code, e.g. 111111
111111
12.
Press Enter
Enter
