background image

8

947182

TONES YOU HEAR -- AND WHAT THEY MEAN

In addition to the confirmation tone and talkback warning tones already described, PagePac® 6 Plus has 
several other tones that help you use the system.

Dial Tone

—PagePac 6 Plus dial tone indicates that you may dial the number for the desired paging 

area.

Regular Dial Tone

—Phone company dial tone indicates that you may dial a phone number.

Busy Tone

—PagePac 6 Plus busy tone indicates that the zone you want to page is in use.

Reorder Tone

—Reorder tone is a “fast” busy tone. Dialing error. Hang up and start over.

Program Tone

—Program tone is two very short tones. You will hear it after selecting an option. It 

indicates the option was successfully selected.

Call Waiting Tone

—Call waiting tone is two short tones (but longer than program tone). You will hear 

it if a call comes in while you are paging.

PAGE DIAL CODES

If talkback is on, the voice of the person at the telephone controls the page/talkback switch. If this 
person speaks or makes any noise, anyone using talkback will be cut off. After the person at the 
telephone is quiet, it takes about one-half second for the speakers to go into talkback.

PLACING A CALL

1. Pick up the telephone and listen for PagePac 6 Plus dial tone

(on key systems, select desired line).

Note:

 If you hear Reorder Tone (a fast busy tone), a dialing error has been made. Hang up and start

over.

2. Dial 9, and listen for the regular dial tone. Or, you may wait for the regular dial tone. If you want the 

operator, dial 0 as soon as you hear PagePac® 6 Plus dial tone.

Note:

 To dial emergency 911, dial 9 or wait for the regular dial tone, and then dial 911.

3. Dial the number. Dialing 9 gives you regular dial tone immediately. If you wait, PagePac 6 Plus will 

time out and then provide regular dial tone. How long this takes depends on which Automatic 

Paging Area

Dial

Zone 1

1

Zone 2

2

Zone 3

3

Zone 2 and 3

4

Zone 1 and 3

5

Zone 1 and 2

6

All Zones

7

Technical Manuals Online! - http://www.tech-man.com

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

Summary of Contents for PagePac 6 Plus















Reviews: