background image

9

947182

Outside Line Access time period you select unless you have selected “Off” for Outside Line Access, 
in which case you will have to dial the 9.

If a call comes in while you are preparing to page, but have not dialed the zone(s), the caller will be con-
nected directly to your phone (with no ring).

If a call comes in while you are paging, the page will be interrupted for a moment, and you will hear Call 
Waiting Tone (two short tones). Hang up, and the phone will ring. You may then answer the call normally.

Note:

 PagePac 6 Plus has an Operator Access feature. Whenever you dial “0” before selecting a paging 

zone, the unit will automatically place the call to the operator.

USING LAST NUMBER REDIAL WITH PAGEPAC 6 PLUS

If your telephones have last number redial, you can use it with PagePac 6 Plus. The exact procedure 
depends on whether or not your phone has a PAUSE button.

Example: Without A PAUSE Button

Note:

 The Automatic Outside Line Access should be set for 2 seconds. (Dial option code 862 for Line 1, 

or 866 for Line 2.)

1. Lift the telephone handset (on a key system, select the desired line), and wait for the regular dial 

tone. Then, dial the number.

To redial:

2. Repeat Step 1, then press the redial button on the telephone

(or on some phones, dial the redial code).

Example: With a PAUSE Button

To place initial call:

1. Lift telephone receiver and listen for PagePac 6 Plus dial tone.
2. Dial 9.
3. Press Pause button and dial number.

To redial:

1. Lift the telephone receiver, listen for PagePac® 6 Plus dial tone.
2. Press redial button (or on some phones, dial redial code).

Note:

 If you have problems using the “With A PAUSE Button” procedure, try the 

“Without A PAUSE Button” procedure.

Note:

 Using PagePac 6 Plus with a PBX—To prevent unintentional pages, connect PagePac 6 Plus on a 

trunk that has a normally unused access code (for example, a trunk that is accessed by dialing 8). 
This trunk may also be used for outgoing and incoming calls.

Technical Manuals Online! - http://www.tech-man.com

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

Summary of Contents for PagePac 6 Plus















Reviews: