background image

Issue 2

1

947175

1 WATT VOICE-COIL HORN

V-5331001

by

PagePac

®

INTRODUCTION

The 1 Watt Voice-Coil Horn is suitable for paging 
in smaller, quiet warehouse and manufacturing 
facilities.  Normal mounting height for a horn is 15 
to 20 feet.  However, in a system with talk-back 
(hands-free answer back) the speaker may have 
to be mounted as low as 8 to 12 feet and set at a 
lower power setting.  Talkback is not recom-
mended for noisy environments.

SPECIFICATIONS

FEATURES

• Design enables the adjustment of sound level 

via speaker transformer taps.  As the taps are 
turned down, the power consumption from the 
amp also goes down and does not consume the 
full one watt.

The 1 Watt Voice-Coil Horn is not compatible 
with 25 or 70V systems

Nominal Specifications

• Frequency Response:  700Hz - 6kHz
• Dispersion:  80°
• Output:  107 dB SPL @ 1W, 1 Meter

Power Requirements

• .016 to 1 Watt adjustable

Dimensions/Weight

• 3 lbs.(1.4 kg)

6.8”Dia. x 8.2"D (17.3cm x 20.8cm)

Environment

• Temperature: 0 to 40°C (32 to 104°F)
• Humidity: 0 to 85%

INSTALLATION

Do not connect more than two horns per talkback 
zone.  Speakers must be mounted in locations 
that provide a clear sound path to the area being 
paged.  Avoid placing speakers in front of shelves, 
partitions, or other obstructions.  To avoid feed-
back, do not place telephones close to horns.  
Various power outputs/tap settings can be easily 
selected on the speakers, using the rotary power 
switch.

MOUNTING

Loosen the wing nut and remove the tapered lock-
ing pin.  Separate the horn from the bracket.  
Mount the bracket using appropriate hardware 
(not supplied).  Position the horn back on the 
bracket for optimum sound direction and install 
locking pin and wing nut. (see Figure 1).  

WIRE CONNECTIONS

A clear plastic cover protects the horn screw ter-
minals and provides strain relief for the wires.

1. Remove the two screws from the plastic cover.
2. Connect the audio wires to the horn.
3. Connect the (+) side of the speaker wire to ter-

minal 2.  Connect the (-) common side of the 
speaker wire to terminal 1 (see Figure 2).

Technical Manuals Online! - http://www.tech-man.com

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

Reviews: