9
947101
WIRING INSTRUCTIONS:
Place a check by each step as it is completed.
__ 1.
Connect the Tip (W/BL) of the V-1101A to
Tip of your telephone system page port.
__ 2.
Connect the Ring (BL/W) lead to Ring of
the page port.
__ 3.
Add a strap on the V-1101A punchdown
block from H to DIR (W/O to W/G).
__ 4.
Connect the V-1101A BG (V/S) lead to one
side of the page port dry contact closure.
__ 5.
Connect the other side of the contacts to the
V-1101A H (W/O) lead.
__ 6.
Connect Tip of the one-way amplified
speaker assemblies to PG (R/BR) of the
V-1101A.
__ 7.
Connect Ring of the speakers to OUT
(BR/R).
__ 8.
Connect the GND terminals of the speakers
(black lead of horns) to the power supply
Ground ("+" or "B Ground").
__ 9.
Connect the –24 Vdc lead of the speakers
(white lead of horns) to the power supply
–24 Vdc terminal ("-" or "B Battery").
__ 10.
Plug in the power supply.
__ 11.
Test the system by dialing the telephone
system page access code or pressing the
page button and speaking into the handset:
__
(a) If you hear the page go to step 12.
__
(b) If you do not hear the page verify steps
1-10 have been performed properly and all
connections are good. Also verify proper
telephone system configuration and
programming. If you have programming
questions contact the telephone system
manufacturer.
__ 12.
Adjust the volume controls on the individual
speakers to the desired levels while paging.
__ 13.
If background music is to be provided:
__
(a) Connect the music source to the
V-1101A MT and MR (R/G and G/R).
__
(b) With the V-1101A idle adjust the music
source volume control to provide the desired
level at the speakers.
(W/BL)
(BL/W)
(W/O)
(O/W)
(V/BR)
(BR/V)
(V/S)
(S/V)
26
1
27
2
49
24
50
25
TIP
RING
BLOCK
T
R
(W/BL)
(BL/W)
H
DIR (W/G)
MT (R/G)
MR (G/R)
(W/O)
PG (R/BR)
OUT(BR/R)
AG (V/BR)
AB (BR/V)
BG (V/S)
BB (S/V)
A GROUND
A BATTERY
B GROUND
B BATT
ONE-WAY
AMPLIFIED SPEAKER
ASSEMBLIES
FIGURE 6
PAGE PORT ACCESS
V-1101A
CONTACT
PUNCHDOWN
