11
+1 540-563-2000 P.
+1 540-362-9800 F.
www.valcom.com
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
Frequently Asked Questions
Can the digital clock be used as an independent clock?
No, the V-D2425B and V-D2440B digital clocks require Valcom 2-wire digital correction.
Some clocks require a 9 volt battery backup for timekeeping. What happens to the V-D2524B or V-D2440B if a power failure occurs?
Upon restoration of power, the clock immediately receives a correction signal from the master clock and resets itself to display the correct time.
This occurs within seconds of “power-up”, so no battery backup is required for a timekeeping base within the individual clocks. Since the clock
does not require a battery backup, the clock never needs to be opened.
What is the minimum operating voltage for the digital clock?
The minimum operating voltage is 18VDC.
How can I display “BELL” text on the clock?
The word “BELL” may be sent to the clocks via contact closure on the V-DCPI Digital Protocol Interface
Su
pp
or
t
