R20 fitting instructions
4
R20 Sidewinder control:
N.B
.
This blind should be installed by a person competent in DIY. If in doubt
please consult a professional.
1
.
The standard universal metal brackets supplied with the blind may be top,
face or side-fixed.
2
.
Check that the blind fits correctly. The pin-end is sprung for easy fitting, but
the pin should be depressed once in place. The fabric should roll off the back
of the barrel, unless ordered reverse-roll.
3
.
Fix the control-end bracket using appropriate screws/plugs.
4
.
Locate the blind in the control-end bracket, and mark the position of the
pin-end bracket.
5
.
Remove blind and fix pin-end bracket using appropriate screws/plugs.
NB.
Fix the control-end bracket using appropriate screws/plugs.
6
.
Insert the pin in the pin-end of blind into the bracket. Press the blind
against the bracket to depress sprung pin, and insert the lug on the control-
end into its bracket until it drops into place.
Fitting Instructions
Roller blinds (R20, Fascia, R20C, R20S, R20W)