Only work on the Hyland 920 during appropriate weather conditions to prevent injury of personnel.
Do not stand under unsecured objects during installation.
Please ensure all batteries are disconnected from the system prior to conducting work, and the
Turbine is connected to the controller with it switched to ‘short’ to prevent the blades from spinning.
Dangers during installation or
maintenance
The technical specifications and turbine dimensions are shown below. Diffuse Energy realise that
each application is unique, and customers may require additional information. We welcome the
opportunity to supply additional technical information.
Technical specifications
Physical dimensions
920 x 920 x 373 mm
Mass
18.5kg
Rated power output
220W
Rated wind speed
11m/s, 40km/h
Peak Current to Battery
20A (limited by breaker)
Peak Power
624 W @ 48 V nominal, 728 W @ 56V charge
Peak Power wind speed
15.5 m/s +, 55km/h+
Cut out wind speed (turbine
stopped with remote system)
~19m/s, 70km/h
4
AUS
sales@valen.com.au NZ sales@valen.co.nz
