Service manual
21
3.3. Cleaning of print head
While cleaning the print head the printer has to be switched off!
Turn up print head (2) by turning the lever (1) as if loading labels.
The print head automatically turns up. If this does not happen please turn the print head manually
but carefully up.
Clean the print head only with dry cleaning solvent. As expedient a close-woven cotton cloth is
recommended. In case this procedure is not sufficient the print head can be cleaned with a
special cleaning foil (to be obtained from us).
Turn down the printhead after cleaning by the lever (1).
Warning:
Please never scratch, rub or use any hard materials to clean the printhead, because
it is very sensitive.