Service manual
25
3.7. Option dispenser
3.7.1. Exchange dispenser
Switch off machine and plug it out!
At first remove 2 screws on the bottom of the printer and the lock-in bolts for the right cover at the
top edge of the chassis, then take off left cover.
Plug out JP4 on the circuit board (see specification on circuit board and cable photocell).
Remove screws (A1, A2).
Remove dispenser, in doing so guide photocell cable (B) with plug through the slot between back
of the front panel (E) and chassis.
If necessary the dispenser photocell (C) can be removed after having taken off the screw (D).
Installation:
Installation of dispenser in opposite order.