Service manual
28
3.10. Option memory-card
3.10.1. Mounting of MC plug-in unit
Switch off printer and plug it out!
At first remove 2 screws on the bottom of the printer and the lock-in bolts for the right cover at the
top edge of the chassis, then take off left cover.
In case circuit board (A) is fixed with 4 cylindrical head screws, replace them by 4 spacer bolts (B)
according to drawing.
Introduce MC-plug-in unit (C) into the chassis opening and fix it with 2 screws (D) on the angular
stay (E).
Attach option board (F) to circuit board (A) following the drawing and fix it with 4 screws (G).
Plug in connecting cable (H).
Fix left cover again.