Service manual
29
4. Possible sources of error
4.1. Error messages on the display
error message
possible causes
how to solve the problem
print head temperature
print head too hot
wait until print head has
cooled down
line too high
position of line outside of
label
place line in a lower position
(Y
)
check rotation, font
line too low
position of line outside of
label
place line in a higher position
(Y
)
check rotation, font
font not installed
selected font not existant
check font and change
character not in font
character not included in font
change font
entry of consecutive
numbers
incorrect entry of
consecutive numbering
check entry of consecutive
numbering and change
magnification code
entered SC factor is invalid
check SC factor and change
width lines or boxes
line projects label rim
change line graphic data
graphic not found on MC
selected graphic not stored
on Memory-Card
store the graphic on the
Memory-Card
check digit wrong
entered check digit is faulty
in check digit control
recalculate check digit
check code data
incorrect no. of digits
entered number of
characters invalid
check code data
incorrect entry of code
mask statement code faulty
check code statement
internal font error
faulty font
Please contact your
distributor.
label or
print head error
no labels
print head not closed
load labels
close print head