BUS TOP K / SOLAR / C
34
1.5
Optional Assemblies
1.5.1 Locking Indication
(only Bus Top K / Solar)
Two micro-switches (S9/S10) may
be mounted in the frame for
connection to an indicator light (H3).
The indicator light indicates the
following with the ignition on:
•
outside emergency handle
locked or
•
outside or inside emergency
handle operated
1.5.2 Cover Position
Indication
1.5.2.1 Bus Top K / Solar,
electrical
An additional micro-switch (S7) in
the cover assembly is connected to
an indicator light (H11) to indicate
the ventilation hatch position. The
indicator light indicates the hatch
open position.
1.5.2.2 Bus Top C
An output of the control unit
routed to connector (X1/4) is used
to connect an indicator light (H1)
indicating the ventilation hatch open
position.
1.5.3 Drive Emergency
Operation
1.5.3.1 Bus Top K / Solar,
electrical
In case of an electrical power
failure a mechanical operation of
the drive is possible with a
screwdriver should an appropriate
opening in the inside cover
panelling be provided.
1.5.3.2 Bus Top C
In case of electrical power failure
the drive may be manually operated
via the worm drive shaft – up to a
date of manufacture 08/99 using an
8 mm spanner wrench through a
slot in the cover inside half panelling
or a 7 mm socket spanner for the
build standard starting from 09/99.
The intermediary ceiling in the bus
must however be removed first.
Kap_gb_neu.fm Seite 34 Donnerstag, Januar 25, 2001 9:09 AM
Summary of Contents for BUS TOP C
Page 106: ...memos...
