BUS BODY ELECTRONICS
6
2 Use
2.1 Activation/deactivation
2.1.1 Activation
Press
button
➔
Sets the last configured temperature; Auto mode off
(Figure 4).
2.1.2 Deactivation
Press
button
➔
Display deactivated.
Press
button for 2 seconds until OFF appears
➔
System deactivated.
2.2 Auto mode
2.2.1 Activation
Press
button if Auto mode is off
➔
Mode is on - corresponding status light and function
symbol light up on the display (Figure 6).
Note
Auto mode can be turned on only if the motor has been
started.
Note
If Auto mode is on, the system automatically turns on Cool-
ing mode
and Heating mode
(if available) as needed
(Figures 7 and 8). The air-conditioning system and heater
are permanently set to dehumidify.
Figure 6 - SC600 Auto mode activated
Figure 7 - SC600 Auto mode activated,
Cooling mode
Figure 4 - SC600 start display
Figure 5 - SC600 deactivation
Figure 8 - SC600 Auto mode activated,
Heating mode
