27
6 - SERVICE PROCEDURE - MAGNETIC CLUTCH
Magnetic Clutch
Removal
●
Step 1: Remove the center bolt using a drive
plate holder (p.31) to prevent armature plate
from rotation.
●
Step 2: Remove the armature plate by hand or
using a M8 screw if necessary.
●
Step 3: Remove the snap ring using external
snap ring pliers.
●
Step 4: Position the center pulley puller at the
end of the driveshaft.
●
Step 5: Attach a suitable pulley puller to the
pulley. Hook the puller claws to the edge of the
pulley.
●
Step 6: Tighten the pulley puller bolt to remove
the pulley.
