anode is to be corrected to that of the battery. And then connected to the main supply.After charging,
disconnect the battery charger from supply mains. Then remove the chassis and andote connection in this
order.
◆
Motor vehicle manufacturers recommend disconnecting the battery from electric system of the vehicle
before charging.
◆
Voltage peak may cause damage to electronic components. It is advisable therefore to disconnect the
battery from the system when charging.
WARNNING: explosive gases/prevent flames and spark/provide adequate ventilation during charging.
Ⅲ、
TECHNIQUE PARAMETER
Model
In put
Voltage/Freq
Out put
Battery Capacity
Voltage
Current
Fuse
0503CB12AP
220V/AC
50Hz
12V/24V
DC
6A/3A
15A
25-90Ah/12V 20-50Ah/24V
CB-13S
7/3.5A
15
25-90Ah/12V 20-50Ah/24V
CB-14S
7A/5A
15A
32-105Ah/12V 20-60Ah/24V
CB-15S
7.5/5
15
32-105Ah/12V 20-60Ah/24V
CB-16S
8A/5A
20A
32-120Ah/12V 25-60Ah/24V
CB-18S
10A
30A
60-150Ah
CB-20S
12A
30A
90-180Ah
CB-30S
16A
30A
120-240Ah
CB-40S
20A
40A
140-300Ah
CB-50S
25A
40A
170-350Ah