Valex 1422528, Instruction Manual And Safety Instructions

-  6  -

MAINTENANCE

Tool maintenance is limited to cleaning with a cloth or soft 

brush avoiding the use of abrasive brushes and aggressive 

detergents. 

Always keep ventilation grids on the casing clean and free 

to ensure correct motor cooling during use.

TROUBLESHOOTING

IMPORTANT! All the following checks must be performed 

with the battery charger disconnected from the power 

supply.

If the tool does not work: Check battery charge status by 

pressing on the test button (where fitted) and fully charge 

it if necessary.

The tool doesn’t charge: make sure your electric system 

works; make sure the battery charger plug and socket are 

not visibly damaged and perfectly fit; make sure the battery 

charger power cable is not damaged or worn; make sure 

that the power on light (where fitted) is always on when 

charging. 

If the tool still doesn’t work, please contact an authorised 

service centre. 

Amendments: All the information in this handbook meet the 

standard in place on the date of printing. 

The manufacturer reserves the right to make changes to 

the product without prior notice in the case of technical, 

production or commercial requirements.

DEMOLITION

Electric and electronic refuse may contain potentially 

hazardous substances for the environment and human 

health. It should therefore not be disposed of with domestic 

waste, but by means of differentiated collection at specific 

centres or returned to the vendor in the event of purchasing 

a new identical appliance. The illegal disposal of such 

equipment may result in prosecution to the full extent of the 

law.

Battery disposal

: The batteries included in the equip-

ment can be disposed of along with it. 

Do not throw the used batteries on the fire and do not 

dispose of them in the environment, but take them to 

special disposal centres. Do not dispose of them with 

domestic waste.

Amendments: All text, diagrams and data correspond to 

the updated standard at the time of printing this manual. 

The manufacturer reserves the right to update the manual 

should any changes be made to the machine.

WARRANTY

The product is protected by law against all non-conformities 

with respect to its stated characteristics, as long as it has 

been used solely in the way described in this user’s manual, 

it has not been tampered with in any way, it has not been 

repaired by unauthorised personnel and, where necessary, 

only original spare parts have been used. Consumables 

and/or components subject to particular wear, such as 

batteries, bulbs, cutting and finishing elements, etc. are 

excluded from the guarantee.
Take the product to your retailer or an authorised assistance 

centre, exhibiting proof of purchase.