background image

-  11  -

6)   USE CAUTION WHILE WORKING

   Do not allow yourself to be distracted and 

always pay attention to what you are doing. 

Use your common sense. Never use the 

machine when tired, ill or under the influence 

of alcohol, drugs or medicines that reduce 

alertness.

7)   KEEP A SAFE DISTANCE FROM THE 

MACHINE 

   Keep persons and animals away from the 

machine and your work area.

8)   PROTECT YOUR BODY 

   The machine generates a strong jet of 

air and ejects material such as dust, etc. 

Always use personal protective equipment 

in accordance with the law to prevent injury 

to the body, eyes, hearing and respiratory 

tract. Wear strong clothing, safety goggles, 

work gloves, safety earmuffs, dust mask. 

Do not wear any clothing or jewellery that 

could be sucked into the machine’s air intake 

and could become trapped in the machine’s 

moving parts. Wear a protective hairnet to 

gather long hair.

9)   EFFICIENCY OF THE MACHINE

   Always check the efficiency and integrity 

of the machine. If in poor conditions, it may 

pose a danger to persons, animals, and 

property.

10)  INTEGRITY OF THE MACHINE

   Do not remove any components from the 

machine unless expressly indicated in these 

instructions and do not modify the original 

configuration in any way.

11)  DO NOT DISASSEMBLE THE MACHINE

   Do not disassemble the machine for any 

reason. Do not use the machine without the 

protection of the dust suction connection or 

without the collection/filter bags.

12)  CHECK THE STABILITY OF THE MACHINE

   Periodically check that all screws are tight.

13)  USE THE MACHINE IN A WELL-VENTILATED 

AREA

   Use the machine in a well-ventilated area 

with a system to allow an intake of air that 

is free of moisture. Sufficient cooling must 

also be provided.

14) DO NOT USE THE MACHINE IN DANGEROUS 

ENVIRONMENTS

   Do not use this machine in environments 

where there is a danger of explosion and/

or fire, in closed or poorly ventilated areas, 

or near liquids, gas, dust, fumes, acids and 

flammable and/or explosive materials. Do not 

use the machine in the presence of sources 

of ignition such as naked flames, cigarettes, 

sparks, incandescent dusts, etc.

15)  POSITIONING OF THE MACHINE

 

 Position the machine on a solid, level surface. 

Do not position it on roofs, scaffolding, 

stairs, sloping surfaces or near pools, 

walls and vehicles. The machine may move 

slightly during operation due to vibration.

16)  WORK WITH ADEQUATE LIGHTING

   Only work when there is sufficient daylight 

or suitable artificial lighting.

17)  DO NOT EXPOSE THE MACHINE TO 

ATMOSPHERIC AGENTS

   This machine is designed for indoor use 

only. Do not use it outdoor. Do not expose 

the machine to the elements such as rain, 

snow, fog, sun, high and low temperatures.

18)  DO NOT TOUCH THE MACHINE IF YOU ARE 

WET

 

 Never use this machine with bare or wet feet. 

Do not touch the machine with wet hands.

19)  IMPROPER USE OF THE MACHINE

   This machine may NOT be used to vacuum 

hazardous dust, dust harmful to health, 

damp wood chips or sawdust, metal 

shavings, liquids, gases, paint mists and 

uses not mentioned in these instructions.

20)  MACHINE NOT WORKING

 

  

Turn the switch to OFF “O” (switched off), 

disconnect the power supply to the machine 

by removing the plug from the socket 

when: The machine is not being used, is 

left unattended, the power supply cord has 

been damaged, the machine is moved from 

one place to another, or when cleaning or 

carrying out maintenance on the machine.

21)  WAIT FOR THE MACHINE TO STOP 

COMPLETELY

   The engine and the moving parts continue 

to run for a short while after the machine is 

switched off.

22)  KEEP THE INTAKE GRILLE AND BAGS 

CLEAN

   Always make sure that the intake grille and 

bags are free of dust, etc.

23)  MOVING THE MACHINE

   Do not attempt to move the machine by 

pulling by the power cord or flexible hose.

24)  REPAIRS MUST BE CARRIED OUT BY 

AUTHORISED PERSONNEL

   Do not attempt to repair this machine or 

to gain access to its internal parts. Always 

contact an authorised service centre. 

Summary of Contents for AT2100

















Reviews: