- 12 -
Interventions by unauthorized personnel will
cause the warranty to be annulled and could
create a dangerous situation.
25) REQUEST AND HAVE ORIGINAL SPARE
PARTS ONLY INSTALLED
Request and use only original spare parts.
Please contact your dealer. The use of non-
original spare parts will cause the warranty
to be annulled and could create a dangerous
situation.
26) STORE THE MACHINE IN A SAFE PLACE
When not in use, keep the machine in a dry
place out of reach of children.
27) ALWAYS FOLLOW THESE INSTRUCTIONS
Only use this machine as described in these
instructions.
28) MACHINE TOOL CONNECTED TO THE DUST
COLLECTOR
Always obser ve the safety r ules
recommended by the manufacturer of the
machine tool to which you connected the
hose.
29) CONNECTION HOSE
For electrical safety, do not use metal hoses
or hoses with spiral wires.
30) CONNECTION
Turn this machine on only if it is correctly
connected to the machine tool for
woodworking.
31) If the machine stalls during use, turn it off
immediately.
ELECTRICAL SAFETY REGULATIONS
1) DO NOT TOUCH LIVE PARTS
!
!
WARNING! Risk of electric shocks. Some
parts of the machine are electrically powered.
2) KEEP CHILDREN AND ANIMALS AWAY
FROM ELECTRICAL DEVICES
Keep children and animals away from the
devices connected to the power supply.
3) CHECK THE POWER SUPPLY VOLTAGE
The power supply voltage must correspond
to that indicated on the technical data plate.
Do not use any other type of power supply.
4) USE A CUTOUT BOX
It is advisable to fit a cutout box on the power
supply line that trips at the levels laid down
in standards currently in force in the Country
in which the machine is used. Contact your
local electrician.
5) CONNECTION TO THE POWER SUPPLY
Before connecting or disconnecting the
machine to or from the power supply, make
sure that the switch is in the OFF “O” position
(switched off).
6) CONNECT ONLY TO A POWER SUPPLY THAT
IS EARTHED
The line that supplies electricity and the
extension cord must be earthed. This is the
only way the machine is electrically safe.
Consult your electrician.
7) DO NOT TAMPER WITH THE POWER CORD
Do not tamper with the power cord. Do not
replace the power cord plug.
8) CHECK THE POWER CORD
The power cord and extension cord (where
fitted) must be checked regularly and before
each use for signs of damage or wear and
tear. If they are not found to be in good
condition disconnect them immediately and
do not use the machine until an authorised
service centre has repaired it.
9) KEEP THE POWER CORD IN A SAFE
POSITION
Keep the power cord and extension cord
(where fitted) away from the working area,
from damp, wet, or oily surfaces, or surfaces
with sharp edges, heat sources, fuel, and
transit areas for vehicles or pedestrians.
10) DO NOT STEP ON OR CRUSH THE POWER
CORD
Never step on the power cord. Be aware of
its position at all times.
11) DO NOT USE THE MACHINE IN THE
PRESENCE OF LIQUIDS
Do not use the machine in case of rain or
mist. Do not wet it with liquids and do not
expose it to damp environments. Do not
leave it outdoors.
12) USE AN EXTENSION CORD SUITABLE FOR
THE MACHINE
Only use an extension cord that is suitable
for the power of the machine you are using,
correctly sized according to its length, and
with an earth wire. Consult your electrician.
13) DISCONNECT THE MACHINE ONLY BY
PULLING THE PLUG
To remove the plug from the socket, only
pull the plug and not the power cord.
14) AVOID TOUCHING SURFACES THAT ARE
EARTHED
Avoid touching surfaces that are earthed.
