- 10 -
g
!
!
IMPORTANT! The battery-operated drill
- screwdriver is suitable for drilling metal,
wood, plastic and brick and for tightening
- loosening screws. It is prohibited to use
dangerous materials in environments with risk
of fire/explosion.
These instructions contain information deemed
necessary for proper use, knowledge and
standard tool maintenance. They do not include
information on drilling and screwing techniques;
the user can find additional information in speci-
fic books or publications or by attending special
training courses.
SYMBOLS
Carefully observe the symbols in
Fig.B
and
memorise the respective meaning. Correct
interpretation of the symbols allows safer use
of the machine.
1 Type.
2 Technical data.
3 Lot number.
4 Trademarks of certifications.
V Volt
Hz Hertz
~
Alternating current
Direct current
A Ampere
W Watt
kg Kilograms
n
O
No-load speed
mm Millimetres
s Second
h Hour
min
-1
R.P.M.
dB Decibel
Double electric insulation
°C
Celsius degree
Li-Ion Lithium Ion
Wh Watt-hour
COMPONENTS
Refer to
Fig. A
and the following figures, atta-
ched to these instructions.
1 Start/stop switch and electronic speed
modulator
2 Rotation direction and start lock switch
3 Rechargeable battery
4 Battery release buttons
5 Ring nut for tightening torque variation
6 Chuck
7 Light for work area
8 Main handle
9 Air vents
10 Switch of speed mechanical
11 Ring to hammer mechanism selection, dril-
ling, tightening
12 Battery charger
13 Checks battery status
14 Led indicator, charging status
16 Battery charging socket
17 Charger Jack
INSTALLATION
!
!
IMPORTANT! The manufacturer is not
liable for any direct and/or indirect damage
caused by incorrect connections.
!
!
IMPORTANT! Before carrying out the fol-
lowing operations, make sure that the plug is
disconnected from the mains.
TRANSPORT
Always use the packaging or case (when provi-
ded) when transporting the tool; this will protect
it from impact, dust and humidity which can
compromise normal operation.
When transporting the tool remove the battery.
MOVING
Position the rotation direction switch in the
middle position in order to prevent accidental
start-up.
Grip the tool by its handle and after use put it
down upright without banging using the base
of the battery.
