- 14 -
be performed by an authorised service centre.
CHUCK REPLACEMENT (fig.D)
1) Open the chuck jaws completely.
2) Insert a screwdriver in the front part of the
chuck until reaching the safety screw.
3) Loosen the safety screw by turning it
clockwise (left thread).
4) Position the friction on high torque (high
number).
5) Now unlock the chuck with a sharp hit in
an anti-clockwise direction and unscrew it
manually.
To assemble the new chuck, follow the previous
operations in the reverse order.
Carry out a trial run.
STORAGE
Clean the tool and all its accessories thoroughly
(see Maintenance section). Protect the unpainted
parts with protective oil and use the original
packaging or case (where fitted) to protect it.
Keep the machine out of reach of children, in a
stable and safe position. The place must be dry,
free from dust, temperate and protected from
direct sunlight.
Keep children and unauthorised personnel out
of the storage room.
DISPOSAL
In order to protect the environment, proceed
according to the local laws in force. Contact the
relevant authorities for more information.
When the machine is not longer useable or re-
pairable, deliver the machine and packaging to
a recycling centre. Take out the batteries (where
fitted) and dispose of them separately.
Electric and electronic waste may contain
substances that are dangerous for the envi-
ronment and for human health. For this reason
they must never be disposed of together with do-
mestic waste, but collected separately in specific
collection centres or returned to the retailer when
similar new equipment has been purchased. The
illegal disposal of such equipment may result in
prosecution to the full extent of the law.
Battery disposal
: The batteries included in
the equipment can be disposed of along with it.
Do not throw the used batteries on the fire and
do not dispose of them in the environment, but
take them to special disposal centres. Do not
dispose of them with domestic waste.
