Valex M-LP 18, Operating Instructions Manual

-  13  -

ABRASIVE SUPPORT REPLACEMENT (fig.E)

Turn the machine over, rip the abrasive support 

off the backing plate, clean, attach the new 

abrasive support, check that the sheet is taut 

and that the holes correspond to the holes on 

the backing plate.

At the end, carry out a trial run. 

ASSEMBLY/REPLACEMENT OF THE VIBRATING 

PLATE/PAD (fig.F)

Carefully follow fig. F for assembly

STORAGE

Clean the machine and all its accessories 

thoroughly (see Maintenance section). Protect 

the unpainted parts with protective oil and use 

the original packaging or case (where fitted) to 

protect it.

Store the machine in a stable and safe position 

out of the reach of children. The place must be 

dry, free from dust, temperate and protected 

from direct sunlight.

Keep children and unauthorised personnel out 

of the storage room.

DISPOSAL

In order to protect the environment, proceed 

according to the local laws in force. Contact the 

relevant authorities for more information.

When the machine is no longer usable or repai-

rable, take the machine and its packaging to a 

recycling centre.

 Electric and electronic waste may contain 

substances hazardous to the environment and 

human health. It should therefore not be dispo-

sed of with household waste, but by means of 

separate collection at special collection centres 

or returned to the vendor in the event of purcha-

sing a new similar tool. Illegal disposal of waste 

will result in administrative sanctions.

Battery disposal: The batteries included in the 

equipment can be disposed of along with it. 

Do not dispose of used batteries in fire and do 

not dispose of them in the environment, but 

take them to special disposal centres. Do not 

dispose of them with domestic waste.

WARRANTY

The product is protected by law against all non-

conformities with regard to its stated characte-

ristics, provided that it has been used solely in 

the way described in these user’s instructions, 

it has not been tampered with in any way, it has 

been stored correctly, it has been repaired by 

authorised personnel and, where necessary, only 

original spare parts have been used.

In the event of industrial or professional use or 

similar, the warranty is valid for 12 months.

To issue a request for intervention covered by 

warranty, proof of purchase must be shown to 

the retailer or authorised service centre.