- 11 -
g
We thank you for having purchased this electrical
tool that will hereafter also be referred to as “planer”.
!
!
IMPORTANT! The planer is suitable for planing
wooden surfaces. Any other use is prohibited.
These instructions contain information deemed
necessary for proper use, knowledge and stan-
dard appliance maintenance. They do not include
information on wood processing techniques; the
user can find additional information in specific
books or publications or by attending special
training courses.
WARNING! Before using the product for the
first time, read and apply the enclosed instruc-
tions for use and safety requirements in order
to avoid danger and incorrect operations.
Any other use other than that expressly indi-
cated may cause serious damage to persons
or animals and should be considered improper
and expressly prohibited, as well as voiding the
warranty offered by the manufacturer.
Carefully kept all these documents for consulta-
tion throughout the life of the product.
COMPONENTS
Refer to fig. A and the following figures:
1. Start/stop switch
2. Safety immobiliser device
3. Rear hand grip
4. Front hand grip/ depth regulator
5. Depth adjuster release button
6. Support surface
7. Guide for bevelling edges
8. Side guide
9. Support bracket
10. Wheel or screw for fixing side guide
11. Wheel or screw fixing bracket
12. Sawdust discharge
13. Device for placing the tool
14. Engine air vents
15. Depth guide
16. Wheel for fixing the depth guide
17. Mobile guard
18. Blade
19. Blade-holder drum
20. Blade-holder plate
21. Blade-holder block
22. Grub screws for adjusting blade alignment
23. Blade fixing screws
24. Power supply plug and cable
25. Sawdust bag
SYMBOLS
Carefully observe the symbols in fig.B and
memorise their respective meanings. Correct
interpretation of the symbols allows a safer use
of the machine.
1 Model
2 Technical data
3 Certifications
4 Production batch number
5 Double electric insulation
6 Electric and electronic waste may contain
potentially hazardous substances for the
environment and human health. It should
therefore not be disposed of with dome-
stic waste, but by means of differentiated
collection at specific centres or returned to
the vendor in the event of purchasing a new
identical power tool. The illegal disposal of
waste will result in administrative sanctions
7 Warning!
8 Carefully read the instructions before use
9 Wear protective gloves
10 Wear safety goggles to protect your eyes,
and safety earmuffs
11 Wear a mask to protect your respiratory tract
V Volt
Hz Hertz
~
alternating current
A Ampere
W Watt
kg kilograms
mm millimetres
s seconds
h hours
dB decibel
