OMNIA
1
1
PREFACE
Thank you for choosing Omnia. The Omnia has been designed for automatic feeding of the material to be processed
and to carry out cutting and creasing for packaging boxes. Brushless motors and continuous cycle processing make it
the most effective solution for medium and large runs.
To ensure high cutting quality and optimal productivity, be sure to read this User Manual thoroughly prior to use.
CAUTION!
The device is for professional use and not for domestic use.
1.1
TO ENSURE PROPER AND SAFE USE
•
To ensure the safe and correct usage of your machine, please read this manual carefully before use.
•
After reading this manual keep it in a handy place for quick consultation if necessary.
•
Do not allow children to touch, or be near, the machine.
•
The following symbols/icons describe important points to safely operate the machine. Please ensure that our safety
and general operating instructions are strictly followed.
1.2
CONVENTIONS USE IN THIS MANUAL
To ensure safe and accurate usage of the machine, as well as to prevent injury to persons and property, the security
measures contained in this manual are classified in three categories as described below. Be sure to get a full
understanding of the difference between each of the categories before reading the manual.
Note
These are warnings to guide and optimize actions by the operator, or to better highlight the
particular characteristics of the machine.
Danger
This category provides information that, if ignored, could result in serious injury to the
operator.
Caution
This category provides information that, if ignored, could result in injury to the operator
and/or damage to the machine.
1.3
SAFETY PRECAUTIONS (NOTE)
Note
When using the cutting tool, take care not to set the blade deeper than necessary. An overly deep
blade set-up might damage the conveyor belt and adversely affect the cutting quality.
Summary of Contents for OMNIA
Page 1: ...OMNIA Instruction and Maintenance Manual...
Page 2: ......
Page 65: ......
Page 66: ...002695 rev 02...
