OMNIA
57
10
DECOMMISSIONING AND DISMANTLING
When dismantling or disposing of the machine it should always be noted that:
•
The client, under 91/689/EEC directives, or byelaws in force in the relevant country, is responsible for the disposal
of the machine and its components.
NOTE!
Qualified people who have knowledge of the appropriate laws and methods to use should
conduct the dismantling and re-cycling operations.
DANGER!
During dismantling of the machine, ensure that the parts being removed are within
limits for a workman to carry (max. 25 Kg) and that there is no risk of anything falling and causing
injury.
DANGER!
When dismantling the machine pay particular attention that it does not become
unbalanced. This could be dangerous for anyone in the immediate vicinity whether involved, or
not involved, in the dismantling operation.
•
The machine should be dismantled in order to effectively seperate the various materials used in its construction.
•
Proceed with emptying the oil in the air pressure regulator ensuring that it is disposed of as necessary under EEC
law or the law of the country prevailing in the country of disposal.
CAUTION:
Discarding oil into the drainage system is prohibited
.
•
All plastic and electrical materials should be taken to authorised recycling organisations.
•
Where possible recycle motors, transformers and electro-mechanical components otherwise take them to official
industrial waste sites.
•
All ferrous metals should by taken to authorised recycling centres.
•
The standby batteries should never be discarded into the environment as they are classed as polutants and
therefore should be disposed of by authorised centres.
10.1
HAZARDOUS SITUATIONS
In the case of a fire use CO
2
extinguishers so as not to damage electrical components.
In the case of fire use powder extinguishers type ABC + Nitrogen to limit the damage in areas not containing electrical
components.
11
DOCUMENTATION SUPPLIED WITH THE MACHINE
Il manuale istruzioni e manutenzione della macchina
e’ accompagnto dai seguenti
documenti:
•
CE declaration of conformity.
•
V-Studio software manual.
•
Vacuum pump manual
•
Electrical system diagram.
•
Warranty & replacement parts shipment form.
Summary of Contents for OMNIA
Page 1: ...OMNIA Instruction and Maintenance Manual...
Page 2: ......
Page 65: ......
Page 66: ...002695 rev 02...
