background image

Mar2018 Revision

 

- 4 - 

REFUNDS. Valley-Dynamo reserves the right to cancel outstanding RMAs 30 
days after issue. Items returned without an RMA will not be inspected or 
credited and may be refused or returned at Customer Expense.   

 

 
SCOPE OF COVERAGE 

Note that our warranty is not an unconditional guarantee for the duration.  
Dynamo products are made to our exacting standards and known for their 
durability, but are not indestructible and may require periodic maintenance in 
order to function properly. The following are not covered by the warranty. 
 
1)

 

Shipping or transport damage 

2)

 

Normal usage, wear and tear 

3)

 

Damage, glass breakage or deterioration resulting from neglect, misuse, 

accident, liquid spills, improper installation, abuse, pets, burns or mishandling  
4)

 

Incidental or consequential damage (except at Valley-Dynamo’s discretion). 

5)

 

Removal or installation charges. 

6)

 

Shipping charges except at Valley-Dynamo’s discretion. 

7)

 

Unauthorized modification of the product. 

8)

 

Use of this product with unapproved parts, conversion kits or accessories. 

9)

 

Damage from fire, flood, lightning or other acts of nature – for your 

protection always use a surge protected outlet. 
 

EXCLUSION OF DAMAGES 

Valley-Dynamo’s sole obligation and liability under this warranty is limited to 
the repair or replacement of a defective product at our option.  Valley-Dynamo 
shall not, in any event, be liable for any incidental or consequential damages 
resulting from interruption of service, loss of business or revenue, or for 
liability in tort relating to this product or resulting from its use or possession. 

 
LIMITATIONS OF IMPLIED WARRANTIES 

There are no other warranties, expressed or implied, including but not limited 
to those of merchantability, revenue generation, or fitness for a particular 
purpose.  The duration of implied warranties is limited to the period specified 
in the Warranty Length section above. 
 

TO OBTAIN TECHNICAL SUPPORT 

Please check the resources available at www.valleydynamoparts.com or 
contact 

TECHHELP@valley-dynamo.com

 

Summary of Contents for All Star Baseball


















Reviews: