12
© Vallox • We reserve the right to make changes without prior notice
DEPLOYMENT WIZARD
EXPERT SETTINGS
PROFILE SETTINGS
In the following chapters, you can make ventilation settings for the
system profiles.
HOME PROFILE
When you want to make the At home profile settings, proceed as
follows:
1. The deployment wizard Home screen will open.
NOTE
Once you have set the basic ventilation air flow rates, the higher
percentage value will default to the At home profile fan speed
value. We recommend this basic amount of ventilation for the At
home profile setting. If necessary, you can change it.
2. Set the
At home
profile fan speed as a percentage of the
maximum by using the
Plus
and
Minus
buttons.
3. The At home profile fan speed value is now set.
4. Press the
Right arrow
button.
5. The temperature setup screen is opened.
6. Set the desired supply air temperature for the
At home
profile
by using the
Plus
and
Minus
buttons. You can adjust the
temperature in the range of +10°C – +25°C.
7. The At home profile supply air temperature is now set.
8. Press the
Right arrow
button.
9. The setup screen for the automatic fan speed control, based
on the relative humidity, appears.
10. Use the
Plus
and
Minus
buttons to select whether the
automatic fan speed control, based on the relative humidity,
is used or not.
11. The automatic fan speed control, based on the relative
humidity, is now set.
12. Press the
Right arrow
button.
13. The setup screen for the automatic fan speed control, based
on the carbon dioxide content, appears.
14. Use the
Plus
and
Minus
buttons to select whether the
automatic fan speed control, based on the carbon dioxide
content, is used or not.
15. The automatic fan speed control, based on the carbon
dioxide content, is now set.
16. Press the
OK
button.
